NANO is a small table press very similar to the MICRO press.
The rollers are different in size from other table models. The ideal plate size for this press is less than 2mm and it is designed for etching and collagraph.
If you are using plates thicker than 2mm you need to create a frame around the plate to support the upper roller. You can add thin strips of lino at the sides of the press bed with paper on (so you get the same thickness of what you are printing).
Bed Plate: 23 x 40cm x 3mm steel plate
Upper Roller: 40mm diameter mounted in pre-lubricated bearings supported by a spiral sprint.
Lower Roller: 40mm diameter mounted in pre-lubricated bearings.
Drive: Direct from crank to lower roller.
Size: 40cm long - 23cm wide - 20cm high.
There are no reviews of this item yet.